POLE SHAFT
The pole shaft is one piece construction, fabricated from a weldable carbon steel and has uniform wall thickness. The shaft will have a minimum yield strength of 55,000 KSI and conforms to ASTM A-500 grade B. The pole shaft has a full length longitudinal resistance weld and is uniformly square in cross-section with flat sides, and rounded corners.
ANCHOR BASE
The anchor base is fabricated from a structural quality, hot rolled carbon steel plate that meets a minimum yield strength 36,000 KSI. The anchor base telescopes the pole shaft and has a circumferential welded top and bottom.
ANCHOR BOLTS
Anchor bolts are fabricated from a commercial quality hot rolled carbon steel bar with a minimum yield strength of 36,000 KSI. Each bolt is furnished with two heavy hex nuts and two flat washers, and will ship with poles unless otherwise specified.
FINISH
A polyester thermosetting powder coating electrostatically applied as standard on all finished poles. Standard finishes are Bronze, Black, and White. Consult your Mobern Electric Representative for pricing on custom finishes.
