Batteries - Sealed Lead-Acid
6.0 Volt 7.0 Ah, Sealed Lead-Acid Battery
.
PowerCell Sealed Lead Acid batteries for alarms, UPS backups, emergency lighting, motorized scooters and other industrial applications.
These batteries confine the electrolyte, but have a vent or valve to allow gases to escape if internal pressure exceeds a certain threshold. During charging, a lead-acid battery generates oxygen gas at the positive electrode. Sealed lead-acid batteries are designed so that the oxygen generated during charging is captured and recombined in the battery. Our valve-regulated battery is the most common type of sealed battery. These types of sealed batteries have a spring-controlled valve that vents gases at a predetermined pressure. Sealed batteries were developed to reduce the maintenance required for batteries in active service. Since electrolyte levels are preserved by trapping and recombining off-gasses, there should not be any need to add distilled water over the life of the battery.
Maintenance-Free.
Rechargeable.
Valve Regulated.
Absorbed Glass Mat (AGM) Battery
SKU: PC670A
Nominal Voltage: 6.0
Nominal Capacity @ 20 hr Rate: 7.0
Length: Inches: 3.86
Length: mm: 98
Width: Inches: 2.20
Width: mm: 56
Height: Inches: 4.02
Height: mm: 102
Height Over Terminal: Inches: 4.02
Height Over Terminal: mm: 102
Unit Weight: lb: 2.96
Unit Weight: kg: 1.34
Case Quantity: 10
Case Weight: lb: 32.2
Terminal Position: 9
Terminal Type: F1
